[CRTech] Christian Radio Tech [MSG 84295]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: RE: RDS Encoder?
To: "'CRTech'" <crtech@crtech.org>
Subject: RE: RE: RDS Encoder?
From: "Bill Hurne" <billhurne@pilgrimradio.com>
Date: Thu, 15 Nov 2018 18:21:36 -0800
Content-language: en-us
In-reply-to: <DM5PR12MB255284558B75999A79F633F8EDDD0@DM5PR12MB2552.namprd12.prod.outlook.com>
References: <2578097e-71e0-184b-bf86-215202f04b95@spiritfm.org> <DM5PR12MB255284558B75999A79F633F8EDDD0@DM5PR12MB2552.namprd12.prod.outlook.com>
Thread-index: AQFyqPP+Z7P/0vOwg8jsto1KkEmePAGBuaQBpglELeA=

We’re still using ComStream ABR202 receivers.   RDS Data channel port is serial only.   Hope to upgrade satellite gear soon.

 

Bill

 

From: Scott Todd [mailto:stodd@kloveair1.com]
Sent: Thursday, November 15, 2018 5:17 PM
To: Jim McDermott; CRTech
Subject: [CRTech] RE: RDS Encoder?

 

The latest Inovonics does it all through the Ethernet port.  Data gets spit out the satellite receiver port to the RDS encoder.  The older Audemat units we had been using needed a serial cable between it and the RDS port on the XDS.

 

Scott Todd

 

From: Jim McDermott [mailto:jim@spiritfm.org]
Sent: Thursday, November 15, 2018 10:33 AM
To: CRTech <crtech@crtech.org>
Subject: RDS Encoder?

 

What are you all using to get full function RDS encoding into your signal? I keep looking at Inovonics, but they still use 9 pin serial ports to get data. My automation computer does not have a serial port nor does it have any slots available to put one in. Are there any dynamic encoders out there that use a usb connection from computer to encoder?

--
Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org

References: RDS Encoder?
(Jim McDermott <jim@spiritfm.org>, 15 Nov 2018 16:33:35 -0000)
RE: RDS Encoder?
(Scott Todd <stodd@kloveair1.com>, 16 Nov 2018 01:17:21 -0000)
Prev by date: RE: RDS Encoder?
(Scott Todd, 16 Nov 2018 01:17:21 -0000)
Next by date: RE: Would like a few volunteers
(Andy Lynch, 16 Nov 2018 13:42:15 -0000)
Prev by thread: RE: RDS Encoder?
(Scott Todd, 16 Nov 2018 01:17:21 -0000)
Next by thread: Heliax cable bend?
(Bill Hurne, 15 Nov 2018 19:11:38 -0000)
CRTech.org