[CRTech] Christian Radio Tech [MSG 84286]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: RDS Encoder?
To: "'CRTech'" <crtech@crtech.org>
Subject: RE: RDS Encoder?
From: "Bill Hurne" <billhurne@pilgrimradio.com>
Date: Thu, 15 Nov 2018 09:13:35 -0800
Content-language: en-us
In-reply-to: <001401d47d02$b593b5b0$20bb2110$@icloud.com>
References: <2578097e-71e0-184b-bf86-215202f04b95@spiritfm.org> <001401d47d02$b593b5b0$20bb2110$@icloud.com>
Thread-index: AQFyqPP+Z7P/0vOwg8jsto1KkEmePAHdszh/pgXMkMA=

I’ve put RDS data over low cost USB to Serial adapter cables with great success.   




From: nathaniel.steele@icloud.com [mailto:nathaniel.steele@icloud.com]
Sent: Thursday, November 15, 2018 8:46 AM
To: 'CRTech'
Subject: RE: [CRTech] RDS Encoder?


Pretty sure the newer innovonics can do IP as well. I have an innovonics, a 2wcom, and a couple PIRA. I use 9pin or IP on all mine. You could try a usb to serial adapter, but honestly I’d just use IP rather than usb. Seriel works good for me over my STL. Latency over IP shouldn’t bean issue if your on a LAN, which I’m assuming you would be if USB is in the running. Heck it really isn’t an issue over WAN given the low Data rate of RDS there is usually a bit of latency anyway.

From: Jim McDermott <jim@spiritfm.org>
Sent: Thursday, November 15, 2018 10:33 AM
To: CRTech <crtech@crtech.org>
Subject: [CRTech] RDS Encoder?


What are you all using to get full function RDS encoding into your signal? I keep looking at Inovonics, but they still use 9 pin serial ports to get data. My automation computer does not have a serial port nor does it have any slots available to put one in. Are there any dynamic encoders out there that use a usb connection from computer to encoder?

Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org

References: RDS Encoder?
(Jim McDermott <jim@spiritfm.org>, 15 Nov 2018 16:33:35 -0000)
RE: RDS Encoder?
(nathaniel.steele@icloud.com, 15 Nov 2018 16:46:15 -0000)
Prev by date: Re: Would like a few volunteers
(Terry Cowan, 15 Nov 2018 17:04:43 -0000)
Next by date: Re: RDS Encoder?
(Dave Land, 15 Nov 2018 18:09:49 -0000)
Prev by thread: RE: RDS Encoder?
(Ben Barber, 15 Nov 2018 20:47:19 -0000)
Next by thread: Re: RDS Encoder?
(Dave Land, 15 Nov 2018 18:09:49 -0000)