[CRTech] Christian Radio Tech [MSG 84068]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: RE: Old Cart Machines and tapes
To: CRTech <crtech@crtech.org>
Subject: RE: RE: Old Cart Machines and tapes
From: Scott Horner <Scott.Horner@SalemMedia.com>
Date: Fri, 5 Oct 2018 22:04:26 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=Scott.Horner@SalemMedia.com;
Content-language: en-US
In-reply-to: <CAE10cw9A6WBisxDOSFkFC9Oq_3mWD_9K=K0dGAYcaJEMPQY8UA@mail.gmail.com>
References: <16A7D97F01744125A635875A242AF51A@ProductionPC> <DM5PR12MB2552FB32DBC2FE16B5F2C8BBEDEA0@DM5PR12MB2552.namprd12.prod.outlook.com> <1401974944.12873894.1538689151511.JavaMail.zimbra@bevcomm.net> <CAE10cw9A6WBisxDOSFkFC9Oq_3mWD_9K=K0dGAYcaJEMPQY8UA@mail.gmail.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AQHUXCYlchjxSQtPRE6+Q7sy/jNfGKUPnROAgACqEoCAAO6jwA==
Thread-topic: [CRTech] RE: Old Cart Machines and tapes

I worked at KACY 152 in Oxnard CA back in the early 1980’s and we had a LAMPEX in the air studio. Basically an AMPEX 350 in a vertical open rack with a lamp and shade attached to it. Very practical.

 

Scott Horner

Salem

 

From: John Stortz [mailto:ka4flx@gmail.com]
Sent: Friday, October 05, 2018 12:48 AM
To: CRTECH <crtech@crtech.org>
Subject: Re: [CRTech] RE: Old Cart Machines and tapes

 

Kind of along this same line, I am looking for a used [hopefully almost free] single phase electric meter box. I have a used, 120V single phase watt-hour meter I would like to make into the base for a table lamp. Then every time the lamp turns on, the meter "wheel" begins to spin.

A guy made one for my son. It becomes quite a curiosity.

 

John S.

 

If corn oil is made from corn, and vegetable oil is made from vegetables, 

then what is baby oil made from?

*~Unknown Wise Guy~

  

 

 

On Thu, Oct 4, 2018 at 5:39 PM Mark Carol Bohnett <mbohnett43@bevcomm.net> wrote:

Dear sirs:

 

I have kept a very clean single cart deck for the purposes of creating a desk lamp. 

 

All you need is a "goose-neck" microphone stand mounted on the top cover of the deck.  Place a functional lamp fixture on the top of the microphone stand.  Throw on a lamp shade (possible decorated in a radio theme).  You can tap the 120VAC off the cart switch to supply the output.  When you place a cart into the deck ... you get light!  Saw it in a PDs office and snagged the idea, when we were junking the decks.

 

Maybe you could create a number of these potential lamps and sell them on eBay!  Radio buffs would probably make it worth you while!

 

If life send you lemons, make lemonade.  If life sends you cart decks, make light!

 

Mark (MN)

 


From: "Scott Todd" <stodd@kloveair1.com>
To: "CRTech" <crtech@crtech.org>
Sent: Thursday, October 4, 2018 4:06:20 PM
Subject: [CRTech] RE: Old Cart Machines and tapes

 

Don’t expect to get a lot for them, but there are a few collectors out there which might give them a good home, especially if they’re a well-respected brand like BE, ITC, Gates, etc.

 

Scott Todd

 

 

From: Alive Radio [mailto:events@aliveradionetwork.com]

Hello All,

 

After cleaning out a storage unit, my boss brought to our station a mass of old cart tapes and machines.  He thinks they hold some value and would like them listed on Ebay.  Though, I think it would just be a waist of time. Any thoughts??  

 

 

Follow-Ups: RE: RE: Old Cart Machines and tapes
("vern@wa0rcr.com vern@wa0rcr.com" <vern@wa0rcr.com>, 5 Oct 2018 22:26:57 -0000)
References: Old Cart Machines and tapes
("Alive Radio" <events@aliveradionetwork.com>, 4 Oct 2018 17:31:54 -0000)
RE: Old Cart Machines and tapes
(Scott Todd <stodd@kloveair1.com>, 4 Oct 2018 21:06:33 -0000)
Re: RE: Old Cart Machines and tapes
(Mark Carol Bohnett <mbohnett43@bevcomm.net>, 4 Oct 2018 21:39:24 -0000)
Re: RE: Old Cart Machines and tapes
(John Stortz <ka4flx@gmail.com>, 5 Oct 2018 07:48:30 -0000)
Prev by date: Re: Re: missed form deadline (was East Test at 1420?)
(Kevin Kidd, 5 Oct 2018 20:15:40 -0000)
Next by date: RE: RE: Old Cart Machines and tapes
(vern@wa0rcr.com vern@wa0rcr.com, 5 Oct 2018 22:26:57 -0000)
Prev by thread: Re: RE: Old Cart Machines and tapes
(John Stortz, 5 Oct 2018 07:48:30 -0000)
Next by thread: RE: RE: Old Cart Machines and tapes
(vern@wa0rcr.com vern@wa0rcr.com, 5 Oct 2018 22:26:57 -0000)
CRTech.org