[CRTech] Christian Radio Tech [MSG 83892]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: NexGen Record Capture
To: CRTech <crtech@crtech.org>
Subject: RE: NexGen Record Capture
From: "Allard, Mark G" <MGAllard@unwsp.edu>
Date: Tue, 25 Sep 2018 23:40:12 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=MGAllard@unwsp.edu;
Content-language: en-US
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=unweagles.onmicrosoft.com; s=selector1-unwsp-edu; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=VN5KQXKpL+DSgNssWW+Vae95kxyl4xcMoBXX0wy4wwY=; b=b4gDRkHfE+Z9Fszi/i0ivdpjsEL4JzP1WUGuDnqcjye/QC72zRkW4nsWsPmTQ8QQ5ZzN7fw+1wR67cRHdckHm1KgaLDBENaKs4HmkPiaxNTZwDDiCLnS3+oxHjj+ZGrsXt+WldfIWMwo7khosN0+DiR4cj0WYFLB7F8KpYlR+Cw=
In-reply-to: <CAPACnZrh6S5sdZ9LKF=wzFAu9ewFEF8TLa1rNU3RQMzr5Gky=g@mail.gmail.com>
References: <BE1C234ADBB46945862CECBEFC6E7C5B010791A75F@AAA-EXCH2010.AmbassadorAdvertising.local> <CAPACnZrh6S5sdZ9LKF=wzFAu9ewFEF8TLa1rNU3RQMzr5Gky=g@mail.gmail.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdRVHCUpaQ/yW8JdTSGHdJDT5JyIVgADCdGAAAAkF2A=
Thread-topic: [CRTech] NexGen Record Capture

Jim, I’m making an assumption that said file is playing out of the AMR and recorded via the DRR in realtime, yes?

Mark A

 

From: Alex McKenzie <alex@kprd.org>
Sent: Tuesday, September 25, 2018 18:34
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] NexGen Record Capture

 

Could it not just be the input gain of the audio card recording into DRR? I would think if that weren't set to 0,  it wouldn't match whatever the file on the AmbOs receiver. 


Best,

Alex

 

Alex McKenzie

Chief Engineer

The Praise Network

785-656-1767

 

 

On Tue, Sep 25, 2018 at 5:10 PM Jim Sanders <JSanders@ambassadoradvertising.com> wrote:

We’re working with a station which uses NexGen to record capture one of our programs off the AMR-100.

 

However, one of several files consistently sounds over-modulated.  We know the files are all the same level as we have fetched the file(s) off their receiver and they’re all at our standard -6dBFS.

 

My question is this . . . do you know if NexGen allows you to set gain boost or trim based on each record capture event?  This seems the only logical explanation for the problem.  If we’re right and you’re familiar with the software, could you point us to where the setting lives?

 

Or, is there something we’re missing??

 

Jim

 

 

 

 

 

Follow-Ups: RE: NexGen Record Capture
(Jim Sanders <JSanders@AmbassadorAdvertising.com>, 25 Sep 2018 23:47:47 -0000)
References: NexGen Record Capture
(Jim Sanders <JSanders@AmbassadorAdvertising.com>, 25 Sep 2018 22:10:21 -0000)
Re: NexGen Record Capture
(Alex McKenzie <alex@kprd.org>, 25 Sep 2018 23:35:05 -0000)
Prev by date: Re: NexGen Record Capture
(Alex McKenzie, 25 Sep 2018 23:35:05 -0000)
Next by date: RE: NexGen Record Capture
(Jim Sanders, 25 Sep 2018 23:47:47 -0000)
Prev by thread: Re: NexGen Record Capture
(Alex McKenzie, 25 Sep 2018 23:35:05 -0000)
Next by thread: RE: NexGen Record Capture
(Jim Sanders, 25 Sep 2018 23:47:47 -0000)
CRTech.org