[CRTech] Christian Radio Tech [MSG 83888]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: NexGen Record Capture
To: CRTech <crtech@crtech.org>
Subject: Re: NexGen Record Capture
From: John Bracken <johnb@calvarysb.com>
Date: Tue, 25 Sep 2018 15:48:02 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=calvarysb-com.20150623.gappssmtp.com; s=20150623; h=from:mime-version:subject:date:references:to:in-reply-to:message-id; bh=+FeivcoTjOe9RBx0y6Q5ePBdQ+79d9ksCXvBm9fviFA=; b=0ktkbmqCS67x3fSq4TwzzG7pUptYj4bXSJzvYJOa9Rpqo1za69OQbqJADy4zFmRS6H hr09p48IiSSW1WDUAiqAZiQ3iO7Zc+0HxubsEzYWj06hCC7MON0k10xDMRTYhSwgCE7i 2oWcnQv72eCt2F/QSKPisW0HkKx3/DfRylLuQnbPjigIeoZmFZV2mfcTo+eEsf9EbGZa RG7wIzOQQcOCxntr3TOo7a9XC73P+sUROm4/ayR4DFqRlj556aqoMeELG/Fmr552ez0F HSHd/KgPW4WoS+ZFTlfOvHAPlxB51RM0z2w1jnJyuiKrGHUinVFix2WQMLkeH7hZlvMY xdfQ==
In-reply-to: <BE1C234ADBB46945862CECBEFC6E7C5B010791A75F@AAA-EXCH2010.AmbassadorAdvertising.local>
References: <BE1C234ADBB46945862CECBEFC6E7C5B010791A75F@AAA-EXCH2010.AmbassadorAdvertising.local>
Attached is the NexGen Manual showing how and where the audio configuration is controlled so someone can confirm settings are proper.
Nexgen’s normalization I believe is non-destructive and if the audio file is ingested then AFC is involved and it has it’s own config settings that need to be checked.  It all depends on the signal path the audio file takes once it is taken from the AMR-100.  I have not used NexGen in a few years. 


Attachment: NexGen 2.6 Guide Config Normalization.pdf
Description: Adobe PDF document





John Bracken, KVRY-LP Manager
Mobile: 805-705-4254
Loving Each Other
Loving our Neighbors

Calvary Chapel Santa Barbara
1 N. Calle Cesar Chavez, Ste. 21
Santa Barbara, CA 93101
805-730-1400 X120

On Sep 25, 2018, at 3:10 PM, Jim Sanders <JSanders@AmbassadorAdvertising.com> wrote:

We’re working with a station which uses NexGen to record capture one of our programs off the AMR-100.
 
However, one of several files consistently sounds over-modulated.  We know the files are all the same level as we have fetched the file(s) off their receiver and they’re all at our standard -6dBFS.
 
My question is this . . . do you know if NexGen allows you to set gain boost or trim based on each record capture event?  This seems the only logical explanation for the problem.  If we’re right and you’re familiar with the software, could you point us to where the setting lives?
 
Or, is there something we’re missing??
 
Jim
 
 

Follow-Ups: RE: NexGen Record Capture
(Jim Sanders <JSanders@AmbassadorAdvertising.com>, 25 Sep 2018 22:54:46 -0000)
Re: NexGen Record Capture
(Stu Engelke Lists <audiotoantenna@gmail.com>, 27 Sep 2018 22:11:52 -0000)
References: NexGen Record Capture
(Jim Sanders <JSanders@AmbassadorAdvertising.com>, 25 Sep 2018 22:10:21 -0000)
Prev by date: RE: NexGen Record Capture
(Cameron Beierle, 25 Sep 2018 22:42:51 -0000)
Next by date: RE: NexGen Record Capture
(Jim Sanders, 25 Sep 2018 22:54:46 -0000)
Prev by thread: RE: NexGen Record Capture
(Cameron Beierle, 25 Sep 2018 22:42:51 -0000)
Next by thread: RE: NexGen Record Capture
(Jim Sanders, 25 Sep 2018 22:54:46 -0000)
CRTech.org