[CRTech] Christian Radio Tech [MSG 83676]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: ASI card AES cable
To: CRTech <crtech@crtech.org>
Subject: Re: ASI card AES cable
From: Mike Shane <mshane@salemomaha.com>
Date: Wed, 5 Sep 2018 22:28:48 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=mshane@salemomaha.com;
Content-language: en-US
In-reply-to: <01a201d4455c$3333fd60$999bf820$@icloud.com>
References: <01a201d4455c$3333fd60$999bf820$@icloud.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdRFXBqWM2QclkwvS6Kj0a6QPNio1AAC7XIz
Thread-topic: [CRTech] ASI card AES cable
Try Studio Hub by Radio Systems. They make a breakout box that can be used for this. 

Of course, you COULD just poke a couple of solid wires, the kind used for punch blocks, into the output pair you want. They’re a perfect fit! (Don’t ask me how I know this.)

Mike Shane in Omaha


On Sep 5, 2018, at 16:06, "nathaniel.steele@icloud.com" <nathaniel.steele@icloud.com> wrote:

 

Anyone know of an el-cheapo solution? I've got ASI 6514 cards and I want to use the Digital outputs instead of the analog. I don't have BOBs for these, and don't really want to buy 10 cable sets at $100 or so a set....I'd be happy with some cat 5e/6 cable and a breakout for the mini 26pin connector, but I can't find any breakouts off the shelf....I Don't need XLR's.....Literally that connector to 6-10' of cable would be fine.

 

Thanks

 

References: ASI card AES cable
(nathaniel.steele@icloud.com, 5 Sep 2018 21:06:12 -0000)
Prev by date: Re: MB1 Schedule
(Laverne Siemens, 5 Sep 2018 21:43:21 -0000)
Next by date: Re: ASI card AES cable
(JOHN VAN MILLIGAN, 6 Sep 2018 01:18:17 -0000)
Prev by thread: ASI card AES cable
(nathaniel . steele, 5 Sep 2018 21:06:12 -0000)
Next by thread: Re: ASI card AES cable
(JOHN VAN MILLIGAN, 6 Sep 2018 01:18:17 -0000)
CRTech.org