[CRTech] Christian Radio Tech [MSG 83519]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: HT-10 Blower Motor/Charlie Goodrich
To: CRTech <crtech@crtech.org>
Subject: RE: HT-10 Blower Motor/Charlie Goodrich
From: Mike Shane <mshane@salemomaha.com>
Date: Mon, 6 Aug 2018 12:34:46 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=mshane@salemomaha.com;
Content-language: en-US
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdQtgZrMmmzJO0AfTsqUEN6rqZbq3Q==
Thread-topic: HT-10 Blower Motor/Charlie Goodrich

For those on this forum who may not have heard, Charlie passed on a week ago today (7/30/2018).  He will be greatly missed. 

 

Mike Shane

Salem Media Group Omaha

 

From: Gregg Richwine [mailto:gmsnrich@live.com]
Sent: Monday, July 23, 2018 3:14 PM
To: CRTech
Subject: [CRTech] Re: HT-10 Blower Motor

 

Charlie Goodrich in Omaha usually has rebuilt Rotron blowers on hand. I've bought replacement blowers from him for one of my HT-10s.

 

Gregg

 


From: Eric Send <erics@wtcmradio.com>
Sent: Monday, July 23, 2018 2:30 PM
To: CRTech
Subject: [CRTech] HT-10 Blower Motor

 

I have a Harris HT-10 transmitter that has a tired blower motor. I am hearing bearing noise coming from the blower. The transmitter has been in service since 1993 and I have an even older HT-10 in service at another facility. Gates Air wants almost 4200.00 for a replacement motor. The lead time is four weeks. I was able to do some research and found a vendor that will sell me a blower for 2400.00 with about the same lead time. 

Still way to much $$$$.

Here is my question for the brain trust. 
Does anyone have a spare motor sitting on a shelf that are willing to part with for a reasonable amount?
Has anyone successfully rebuilt the original blower motor?
Has anyone successfully retrofitted a different less costly blower into an HT-10? 

Eric 
WTCM Radio
Traverse City, Mi 

BLOWER 230V 50/60 HZ
3220RPM, 525CFM, 410W |
ROTRON CX33A3G (DISTR #027555 (OBS)) | 
AMETEK-ROTRON 037792 (MODEL #NC33A3G)

Follow-Ups: RE: HT-10 Blower Motor/Charlie Goodrich
(Scott Todd <stodd@kloveair1.com>, 6 Aug 2018 13:15:23 -0000)
Re: RE: HT-10 Blower Motor/Charlie Goodrich
(Rick Jesse <javajava56@gmail.com>, 6 Aug 2018 17:23:07 -0000)
Prev by date: Re: HT-10 Blower Motor
(John Stortz, 6 Aug 2018 00:02:32 -0000)
Next by date: RE: HT-10 Blower Motor/Charlie Goodrich
(Scott Todd, 6 Aug 2018 13:15:23 -0000)
Prev by thread: DETROIT Equipped on Moody XDS RE: Moody Radio XDS Receiver Firmware Updates today - Wednesday, 8/1/2018
(Stephen Dealy, 2 Aug 2018 18:03:41 -0000)
Next by thread: RE: HT-10 Blower Motor/Charlie Goodrich
(Scott Todd, 6 Aug 2018 13:15:23 -0000)
CRTech.org