[CRTech] Christian Radio Tech [MSG 83433]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Overheating Problem
To: CRTech <crtech@crtech.org>
Subject: RE: Overheating Problem
From: Mike Shane <mshane@salemomaha.com>
Date: Tue, 24 Jul 2018 21:30:27 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=mshane@salemomaha.com;
Content-language: en-US
In-reply-to: <DM5PR12MB2552E5554BE42447924E7ABDED550@DM5PR12MB2552.namprd12.prod.outlook.com>
References: <f1d0d902-2a38-5a1f-adf7-161816b07850@spiritfm.org> <DM5PR12MB2552E5554BE42447924E7ABDED550@DM5PR12MB2552.namprd12.prod.outlook.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AQHUIug6zrFq6aKROUaWppP02yx4Z6Se5I7g
Thread-topic: Overheating Problem

Also a VS-1.  Had to go back to the factory for repairs.  It shut down somewhere around 122°F.

 

Mike Shane

Salem Media Group Omaha

 

From: Scott Todd [mailto:stodd@kloveair1.com]
Sent: Monday, July 23, 2018 7:49 PM
To: CRTech
Subject: [CRTech] RE: Overheating Problem

 

Yep- a VS1, but not only was the display blank, it completely shut down.  I was surprised the NX-6 in the building was still cranking out over 5kW when the room temp had reached almost 140 deg.

 

Scott Todd

 

From: Jim McDermott [mailto:jim@spiritfm.org]
Sent: Monday, July 23, 2018 6:15 PM
To: CRTech <crtech@crtech.org>
Subject: Overheating Problem

 

Anyone here have a newer Nautel that was in a small space where the AC failed? The UI screen is blank, but I think it's on - just no characters.  I suspect the temp when we got there was over 120 in the room. The transmitter is on and I believe it's at the same power level where I left it last. I just can't see anything and I have no control. Can I plug a computer in the interface and see the control stats and menu?

--
Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org

Follow-Ups: Re: RE: Overheating Problem
(Tom Van Gorkom <tomvangorkom@gmail.com>, 24 Jul 2018 22:45:32 -0000)
References: Overheating Problem
(Jim McDermott <jim@spiritfm.org>, 23 Jul 2018 23:14:47 -0000)
RE: Overheating Problem
(Scott Todd <stodd@kloveair1.com>, 24 Jul 2018 00:49:38 -0000)
Prev by date: HT-10 Blower Motor
(Ed Trombley, 24 Jul 2018 04:25:02 -0000)
Next by date: Re: RE: Overheating Problem
(Tom Van Gorkom, 24 Jul 2018 22:45:32 -0000)
Prev by thread: RE: Overheating Problem
(Scott Todd, 24 Jul 2018 00:49:38 -0000)
Next by thread: Re: RE: Overheating Problem
(Tom Van Gorkom, 24 Jul 2018 22:45:32 -0000)
CRTech.org