Have you called Graham Electric here in T.C. to ask if they are able to rebuild it? bearings should not be too serious if nothing else is wrong.
Don Parker WLJN T.C.
From: Eric Send <email@example.com>
Sent: Monday, July 23, 2018 3:31 PM
To: CRTech <firstname.lastname@example.org>
Subject: [CRTech] HT-10 Blower Motor
I have a Harris HT-10 transmitter that has a tired blower motor. I am hearing bearing noise coming from the blower. The transmitter has
been in service since 1993 and I have an even older HT-10 in service at another facility. Gates Air wants almost 4200.00 for a replacement motor. The lead time is four weeks. I was able to do some research and found a vendor that will sell me a blower for
2400.00 with about the same lead time.
Still way to much $$$$.
Here is my question for the brain trust.
Does anyone have a spare motor sitting on a shelf that are willing to part with for a reasonable amount?
Has anyone successfully rebuilt the original blower motor?
Has anyone successfully retrofitted a different less costly blower into an HT-10?
Traverse City, Mi
BLOWER 230V 50/60 HZ
3220RPM, 525CFM, 410W |
ROTRON CX33A3G (DISTR #027555 (OBS)) |
AMETEK-ROTRON 037792 (MODEL #NC33A3G)