[CRTech] Christian Radio Tech [MSG 83389]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: Time for a new or rebuilt tube
To: crtech@crtech.org
Subject: Re: Time for a new or rebuilt tube
From: Terry Cowan <tcowan@knlr.com>
Date: Thu, 19 Jul 2018 15:11:25 -0700
Content-language: en-US
In-reply-to: <81CAB51B-4E51-46DE-845C-A17AE7C52625@earthlink.net>
References: <CACci8U6LcSAnzPXsk3UahZ6f1sXF1LUrMR7AKbVyFNJ7Ua9bhg@mail.gmail.com> <04588DE8-4179-47BF-B22B-5444A52FA1EC@earthlink.net> <5047862d-ec63-b4a4-aea4-34f17ee57526@knlr.com> <81CAB51B-4E51-46DE-845C-A17AE7C52625@earthlink.net>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.9.1

You should have Nautel do an analysis for your client.  Depending on the power rate, the savings in power, tubes and maintenance may provide a quicker payback  than you think.  And no I don't have any pecuniary relationship with Nautel.

Terry


On 07/19/18 10:35, Tommy Gray wrote:
Yep that would be preferable but none of these small market stations have that kind of money!

Blessings!

Tommy Gray 

On Jul 19, 2018, at 12:02 PM, Terry Cowan <tcowan@knlr.com> wrote:

The best thing I did was buy a new Nautel.  Don't miss changing tubes in the middle of the night at all

Terry Cowan

KNLR/KNLX


On 07/19/18 09:48, Tommy Gray wrote:
Hi folks!  I too would love to see what alternatives folks are using instead of Econco.  Out of 5 rebuilts we have received from them this year, 3 have been bad out of the box.  Two dead at startup and one lasted 30
Minutes before an internal
Short killed it.  The one that worked lasted a little
Over 6 months before not making sufficient power to keep them.   This is in 4 different transmitters so it has to be tubes.  We finally started buying new tubes lately.  Changing a tube three times just to get a good one is a pain!  

The owner of one of the stations asked me about National.  Any experience with these for new ones.  All my experience with them
Is many years back.  We are using 3CX15000A7 and 3CX20000A7.

Blessings!

Tommy Gray 

On Jul 19, 2018, at 11:37 AM, Dave Land <dave@klvv.com> wrote:

I know this has been discussed before but I can't find the old emails. We need a new or rebuilt 4CX7500A. I see that RF Parts has a Taylor brand new one for $1795 while ECONCO wants $1949 to rebuild our old one.
Anybody tried the Taylor? Or a suggestion for another rebuilder?
Thanks in advance...
Dave Land
Chief Engineer
The Love Station, Inc.
Ponca City, OK



References: Time for a new or rebuilt tube
(Dave Land <dave@klvv.com>, 19 Jul 2018 16:37:19 -0000)
Re: Time for a new or rebuilt tube
(Tommy Gray <tommygray@earthlink.net>, 19 Jul 2018 16:48:26 -0000)
Re: Time for a new or rebuilt tube
(Terry Cowan <tcowan@knlr.com>, 19 Jul 2018 17:02:40 -0000)
Re: Time for a new or rebuilt tube
(Tommy Gray <tommygray@earthlink.net>, 19 Jul 2018 17:35:12 -0000)
Prev by date: Re: C-Band Dish Issue
(Steve Tuzeneu, 19 Jul 2018 20:57:00 -0000)
Next by date: Re: C-Band Dish Issue
(David Benson, 20 Jul 2018 01:33:59 -0000)
Prev by thread: Re: Time for a new or rebuilt tube
(Tommy Gray, 19 Jul 2018 17:35:12 -0000)
Next by thread: Re: Time for a new or rebuilt tube
(KBGN AM, 20 Jul 2018 02:48:33 -0000)
CRTech.org