Regardless of the brand of cable, typically you just have the antenna-side connector installed at the factory and install the transmitter-side connector after the cable is inside
Thank you for your support!
Chief Engineer | Indiana
1920 W. 53rd Street, Anderson, IN 46013
From the Word to Life®
97.9 FM Indianapolis
91.7 FM Kokomo
89.9 FM West Lafayette
90.3 FM Covington
88.1 FM Mitchell/Bloomington
From: Dave Land <email@example.com>
Sent: Friday, June 22, 2018 10:44 AM
To: CRTech <firstname.lastname@example.org>
Subject: [CRTech] RFS 1 5/8" cable connector?
I know many of you have used RFS cable. I've got some 1 5/8" on order with connectors already installed but when I read the manual I see that I need to install some ferrite chokes on the transmitter
end and they won't fit over the connector. How hard is it to take the connector off and put it back on? OR should I change my order to not have it installed and I install it on site?
Thanks for your sage advice...