[CRTech] Christian Radio Tech [MSG 82890]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: Barix Upgrade
To: crtech@crtech.org
Subject: Re: Barix Upgrade
From: Jim McDermott <jim@spiritfm.org>
Date: Mon, 7 May 2018 18:20:20 -0500
Content-language: en-US
In-reply-to: <0e7501d3e64f$5c228f50$1467adf0$@gmail.com>
References: <CAB42DVp-Ar5yWjC6yB_R0Ap-=uF3iz6kfg4Gzz4t94jiV3LTFQ@mail.gmail.com> <1520336569.781304.1525715902789@mail.yahoo.com> <bd527538-0a85-ee76-4b90-d30aaa3721cb@spiritfm.org> <0e7501d3e64f$5c228f50$1467adf0$@gmail.com>
User-agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101 Thunderbird/52.7.0
Ron, that's pretty much what I thought.

--
Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org


On 5/7/2018 5:04 PM, Ron Huckeby wrote:

Jim:

 

I spent quite a while one Saturday afternoon trying to connect to an AAC stream with a Barix. Then I read the fine print on the Barix website. If it does not have the AAC sticker on the bottom, it won’t do AAC. Old Exstreamers are out for AAC.

 

BTW, I saw at the NAB show that Barix has a new encoder box that will encode ACC as well. I don’t recall what it was called.

 

Blessings,

 

Ron Huckeby, CBRE

Broadcast Engineer

Butte, Montana

406.491.4998

200
                pixelSBECertifiedLogo2015

 

From: Jim McDermott [mailto:jim@spiritfm.org]
Sent: Monday, May 07, 2018 12:09 PM
To: crtech@crtech.org
Subject: [CRTech] Barix Upgrade

 

Speaking of Barix codecs, is there any way to upgrade an older box to make it able to decode an AAC+ stream? I tried a firmware update, but it did no good.

--
Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org



References: Reset Barix?
(Tom Van Gorkom <tomvangorkom@gmail.com>, 7 May 2018 17:19:53 -0000)
Re: Reset Barix?
(JIm Turvaville <jimturbo61@yahoo.com>, 7 May 2018 17:58:36 -0000)
Barix Upgrade
(Jim McDermott <jim@spiritfm.org>, 7 May 2018 18:08:49 -0000)
RE: Barix Upgrade
("Ron Huckeby" <huckebyrj@gmail.com>, 7 May 2018 22:04:32 -0000)
Prev by date: RE: Barix Upgrade
(Ron Huckeby, 7 May 2018 22:04:32 -0000)
Next by date: Fines for no paint and lights?
(Dave Land, 8 May 2018 14:49:50 -0000)
Prev by thread: RE: Barix Upgrade
(Ron Huckeby, 7 May 2018 22:04:32 -0000)
Next by thread: Dish info
(Mike Shane, 7 May 2018 19:07:46 -0000)
CRTech.org