[CRTech] Christian Radio Tech [MSG 82886]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Dish info
To: CRTech <crtech@crtech.org>
Subject: RE: Dish info
From: Mike Shane <mshane@salemomaha.com>
Date: Mon, 7 May 2018 20:32:19 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=mshane@salemomaha.com;
Content-language: en-US
In-reply-to: <5af0a95e.1c69fb81.2aa6e.64ee@mx.google.com>
References: <BN3PR0801MB2308AE8207B9CB6240866936B59B0@BN3PR0801MB2308.namprd08.prod.outlook.com> <5af0a95e.1c69fb81.2aa6e.64ee@mx.google.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdPmNYU231cvCGF3RcOkM5BtjjJUdwABFkEAAAImBhA=
Thread-topic: [CRTech] Dish info

Thanks, Floyd.


Mike Shane

Salem Media Group Omaha


From: Floyd Turner [mailto:fet3eng@gmail.com]
Sent: Monday, May 07, 2018 2:31 PM
To: CRTech
Subject: Re: [CRTech] Dish info


The datasheet I have for my Comtech 3.8 m dish shows 42.9 db gain at midband.





Sent via the Samsung Galaxy Note8, an AT&T 4G LTE smartphone


-------- Original message --------

From: Mike Shane <mshane@salemomaha.com>

Date: 5/7/18 2:06 PM (GMT-06:00)

To: CRTech <crtech@crtech.org>

Subject: [CRTech] Dish info


Anyone know what the receive gain might be on a 3.8 meter Comtech dish, the model number we cannot seem to locate?  The freq is the Consortium freq we’ve been on since the last freq change.


Mike Shane



From: JIm Turvaville [mailto:jimturbo61@yahoo.com]
Sent: Monday, May 07, 2018 1:33 PM
To: CRTech
Subject: Re: [CRTech] Barix Upgrade


My experience is the new firmware works in even the oldest of the boxes I've had and it plays the AAC streams just fine. 

My oldest box I upgraded from a v2 software to 3.15 and it worked fine.  
But I'm also on a Barix 100, the higher version boxes may not work that way. 


Jim "Turbo" Turvaville 

SBE Certified Radio Engineer 

Turbo Technical Services 

 PH: 719-459-1859 


From: Jim McDermott <jim@spiritfm.org>
To: crtech@crtech.org
Sent: Monday, May 7, 2018 1:08 PM
Subject: [CRTech] Barix Upgrade


Speaking of Barix codecs, is there any way to upgrade an older box to make it able to decode an AAC+ stream? I tried a firmware update, but it did no good.

Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org


References: Dish info
(Mike Shane <mshane@salemomaha.com>, 7 May 2018 19:07:46 -0000)
Re: Dish info
(Floyd Turner <fet3eng@gmail.com>, 7 May 2018 19:30:44 -0000)
Prev by date: Re: Dish info
(Floyd Turner, 7 May 2018 19:30:44 -0000)
Next by date: Re: Subaudible Tones
(Alan Kilgore, 7 May 2018 21:28:36 -0000)
Prev by thread: Re: Dish info
(Floyd Turner, 7 May 2018 19:30:44 -0000)
Next by thread: Fines for no paint and lights?
(Dave Land, 8 May 2018 14:49:50 -0000)