[CRTech] Christian Radio Tech [MSG 82884]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Dish info
To: CRTech <crtech@crtech.org>
Subject: Dish info
From: Mike Shane <mshane@salemomaha.com>
Date: Mon, 7 May 2018 19:06:34 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=mshane@salemomaha.com;
Content-language: en-US
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdPmNYU231cvCGF3RcOkM5BtjjJUdw==
Thread-topic: [CRTech] Dish info

Anyone know what the receive gain might be on a 3.8 meter Comtech dish, the model number we cannot seem to locate?  The freq is the Consortium freq we’ve been on since the last freq change.

 

Mike Shane

Omaha

 

From: JIm Turvaville [mailto:jimturbo61@yahoo.com]
Sent: Monday, May 07, 2018 1:33 PM
To: CRTech
Subject: Re: [CRTech] Barix Upgrade

 

My experience is the new firmware works in even the oldest of the boxes I've had and it plays the AAC streams just fine. 

My oldest box I upgraded from a v2 software to 3.15 and it worked fine.  
But I'm also on a Barix 100, the higher version boxes may not work that way. 

 

Jim "Turbo" Turvaville 

SBE Certified Radio Engineer 

Turbo Technical Services 

 PH: 719-459-1859 

 


From: Jim McDermott <jim@spiritfm.org>
To: crtech@crtech.org
Sent: Monday, May 7, 2018 1:08 PM
Subject: [CRTech] Barix Upgrade

 

Speaking of Barix codecs, is there any way to upgrade an older box to make it able to decode an AAC+ stream? I tried a firmware update, but it did no good.

--
Jim McDermott
President, Lake Area Educ Broadcasting
Spirit FM Radio & The Pulse Channel

Lake of the Ozarks, MO
www.spiritfm.org -- www.pulsechannel.org

 

Follow-Ups: Re: Dish info
(Floyd Turner <fet3eng@gmail.com>, 7 May 2018 19:30:44 -0000)
Prev by date: Re: Barix Upgrade
(JIm Turvaville, 7 May 2018 18:33:13 -0000)
Next by date: Re: Dish info
(Floyd Turner, 7 May 2018 19:30:44 -0000)
Prev by thread: Re: Barix Upgrade
(Jim McDermott, 7 May 2018 23:20:30 -0000)
Next by thread: Re: Dish info
(Floyd Turner, 7 May 2018 19:30:44 -0000)
CRTech.org