[CRTech] Christian Radio Tech [MSG 82178]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: Occasional "burps" on U4K?
To: CRTech <crtech@crtech.org>
Subject: Re: Occasional "burps" on U4K?
From: Sherrod Munday <smunday@ieee.org>
Date: Mon, 19 Feb 2018 15:36:01 -0500
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ieee-org.20150623.gappssmtp.com; s=20150623; h=from:content-transfer-encoding:mime-version:date:subject:message-id :references:in-reply-to:to; bh=zdHeOMPr+oEhlPC3P46F96uDHVoaBT9xU9imZJr6hPk=; b=f7Uwj/yxt3+2496UAusMxxgOqb8xJV5YdY2DgfDmztFHGYX1YOO3h45B/YCUS5spHr wrqHSTT3Btz/sIEIMxE1ghqcJZOg1THDv+/u46dgesaPj6DXdEkAhhCRhP0sOy95q/3O iYJaOhm3vM0c/JKvACrmER4zrpH4z8/99cpu9h2W72P1s4/cJ9X+2/Q5eITQBKiq/w/B jx0JWTSjv2Gv9HjEQ5AaelToSOasxc24pjQVwXNyWihUb0qPWBTTCcL+6I8FgQ4ZQ5Uy GbyYTAFwUSQOVlSx1igSg2AiKARs3qX9IQJf28zNDSs18oZB2aLKEZmZJ182JCmVQVeT PGBg==
In-reply-to: <CAOkhgWogooH7j-+QbnaJ8c-dwYTyjUbiyjRkyarS3ax3ooTBWQ@mail.gmail.com>
References: <CAOkhgWqbPwK8xSkH1sZm2yrRYz0q6ffMFOSnXn2C00fjOR3ZcA@mail.gmail.com> <CY4PR07MB3542C83C8715A4FEA4C6E691D3C80@CY4PR07MB3542.namprd07.prod.outlook.com> <CAOkhgWogooH7j-+QbnaJ8c-dwYTyjUbiyjRkyarS3ax3ooTBWQ@mail.gmail.com>
On Feb 19, 2018, at 14:23, Willie Barnett <wbradiolists@gmail.com> wrote:
The EBNO hovers around 10. When I heard the "blurps", I quickly looked at the receiver noticed the red LED blink ever so briefly, and the EBNO dropped briefly to about 9. The "blurping" only started about a month ago, and seems to be random. (That's why I said 0 to 4 times per newscast.) They usually only take out a word or two. They're fairly short.
...
Our receivers are fed by the same dish.

Willie:

While it could be a failing U4K, I'd suggest that you start with the more mundane.  What you're describing sounds like a classic case of interference.

* RF connections between the dish and splitter:
  * Ensure the connectors are snugly connected to the jacks
   * Check the coax line to ensure it's not crimped/bent/nicked
   * Check the shield to ensure it's not broken anywhere on the line
 Etc.

* Possible local TI (terrestrial interference) that the receivers may handle differently due to different design and performance

* Check the splitter itself to ensure you don't have a faulty port. It happens.

* Look at a spectrum analyzer when you hear those chirps, if at all possible.  Set up a webcam in front of the display and use something like ContaCam (free Windows motion-detect & archive program for webcams) to record changes over time or brief hits on the RF.

* Check your RF levels, like Mark said. Be aware that the U4K may have a tighter tolerance for this spec than the AMR.  Try 3- or 6-dB attenuators or an adjustable RF amp as one pair of possibilities.  Don't forget to look and experiment on both sides of the splitter.

* Check the alignment of your dish and LNB. Again, I recognize your single dish feed goes to all the receivers, but it still merits a trip outside to confirm.

(Speaking of: the upcoming solar transit outage is a perfect time to check for obstructions in the path of the satellite dish during peak signal loss.  See the recent article in Radio World for pictures and an article about this.)

I hope these suggestions help!

--
Sherrod Munday


Follow-Ups: Another OPIF Question
(Jim McDermott <jim@spiritfm.org>, 19 Feb 2018 21:40:00 -0000)
Re: Occasional "burps" on U4K?
(Michael Barnes <barnmichael@gmail.com>, 19 Feb 2018 23:28:11 -0000)
References: Occasional "burps" on U4K?
(Willie Barnett <wbradiolists@gmail.com>, 19 Feb 2018 18:12:19 -0000)
RE: Occasional "burps" on U4K?
("Allard, Mark G" <MGAllard@unwsp.edu>, 19 Feb 2018 18:32:41 -0000)
Re: Occasional "burps" on U4K?
(Willie Barnett <wbradiolists@gmail.com>, 19 Feb 2018 19:23:38 -0000)
Prev by date: Re: Occasional "burps" on U4K?
(Willie Barnett, 19 Feb 2018 19:23:38 -0000)
Next by date: Another OPIF Question
(Jim McDermott, 19 Feb 2018 21:40:00 -0000)
Prev by thread: Re: Occasional "burps" on U4K?
(Willie Barnett, 19 Feb 2018 19:23:38 -0000)
Next by thread: Another OPIF Question
(Jim McDermott, 19 Feb 2018 21:40:00 -0000)
CRTech.org