[CRTech] Christian Radio Tech [MSG 81509]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: AmB-OS IP changes
To: CRTech <crtech@crtech.org>
Subject: RE: AmB-OS IP changes
From: Jeff Gallatin <jeffg@wzxv.org>
Date: Tue, 12 Dec 2017 20:41:33 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <CAL=56PpCnNHk8+GnjTVZgqSjUu27=h-kg5Vx4C7kYW39kdP9Jg@mail.gmail.com>
References: <CAL=56Pq9G-dP9cGkgN0k345sKX+njZYjyaS81ih5jaNSspwhHw@mail.gmail.com> <003101d37306$c45ca400$4d15ec00$@skylightcorp.com> <CAL=56PpCnNHk8+GnjTVZgqSjUu27=h-kg5Vx4C7kYW39kdP9Jg@mail.gmail.com>
Thread-index: AQHTcwPotLNpuw5JDEiMn06UmB3jt6M/e08AgAAC+wCAAK6rMA==
Thread-topic: [CRTech] AmB-OS IP changes

May I ask if any of this thread has anything to do with a loud CONSTANT tone we are receiving now through our AMR?





Jeff Gallatin



WZXV 1777 Rochester Rd. Farmington, New York 14425

P-585.398.3569 F-585.398.3250 www.wzxv.org


From: Tom Beattie [mailto:tom@tombeattie.com]
Sent: Tuesday, December 12, 2017 12:16 AM
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] AmB-OS IP changes


Thanks!  I've send an email off to support.  You guys are always right on it! =)


Tom Beattie
IT Consultant


On Mon, Dec 11, 2017 at 11:05 PM, Richard Becvar <rjbecvar@skylightcorp.com> wrote:

Hi Tom,


The command interface is now disabled by default due to security concerns as some folks were placing the AMRs on a public accessible IP address..

If your unit is behind a firewall we can re-enable it easily with a remote command..

Just send along your serial number and station callsign to support@amb-os.com and we’ll take care of it..






From: Tom Beattie [mailto:tom@tombeattie.com]
Sent: Monday, December 11, 2017 10:43 PM
To: CRTech <crtech@crtech.org>
Subject: [CRTech] AmB-OS IP changes




Is there no longer a way to access the command interface?  If not, is the front panel the only way now to change anything other than the IP address?  It looked like I might be able to change that with the export/import function.  I can't seem to find a way.



Tom Beattie
IT Consultant


Follow-Ups: Re: AmB-OS IP changes
(Mark Croom <markc@newmail.kinshipradio.org>, 12 Dec 2017 20:48:52 -0000)
Re: AmB-OS IP changes
(dave allen <crtech-mail@reyware.us>, 12 Dec 2017 20:49:51 -0000)
References: AmB-OS IP changes
(Tom Beattie <tom@tombeattie.com>, 12 Dec 2017 04:43:42 -0000)
RE: AmB-OS IP changes
("Richard Becvar" <rjbecvar@skylightcorp.com>, 12 Dec 2017 05:05:12 -0000)
Re: AmB-OS IP changes
(Tom Beattie <tom@tombeattie.com>, 12 Dec 2017 05:16:28 -0000)
Prev by date: RE: misc heliax and fittings
(Ron Huckeby, 12 Dec 2017 18:47:46 -0000)
Next by date: Re: AmB-OS IP changes
(Mark Croom, 12 Dec 2017 20:48:52 -0000)
Prev by thread: Re: AmB-OS IP changes
(Tom Beattie, 12 Dec 2017 05:16:28 -0000)
Next by thread: Re: AmB-OS IP changes
(Mark Croom, 12 Dec 2017 20:48:52 -0000)