[CRTech] Christian Radio Tech [MSG 81464]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: SDRs in broadcast
To: CRTech <crtech@crtech.org>
Subject: Re: SDRs in broadcast
From: Tyger Elton <tyger@wilkinsradio.com>
Date: Mon, 4 Dec 2017 19:56:48 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <CAHL64sFO14soAv-ugApadnxUREdoTejjUUGTxhiFEY=1ivThvQ@mail.gmail.com>
References: <16013fff630.27ea.ecb7cb34b851c43635e81132be394647@me.com> <0Lb2rv-1en6Fj0x33-00kfX6@mrelay.perfora.net> <20171201151826.Horde.ICoZF7EPHrFM0YsdbzxACya@box1368.bluehost.com> <004a01d36d33$eb5d5b40$c21811c0$@pilgrimradio.com> <86D1BF3B25E344AA82DAAB410DCDE65B@bruces>,<CAHL64sFO14soAv-ugApadnxUREdoTejjUUGTxhiFEY=1ivThvQ@mail.gmail.com>
Thread-index: AQHTat4eGtDrKQod5USfgyT7gZ1q3qMvWyGAgAAL3wCAAAG5AIAACr0AgASDKgD//5+jwYAAabcA//+eVKw=
Thread-topic: [CRTech] SDRs in broadcast
Kevin,

Have you looked into the REA AMM-SD1? I use these at all my sites.


Tyger Elton
Director, Corporate Station Operations
Corporate Engineer

Local Office
309 Smith Grove Road
Forest City, NC 28043
Cell: 864-504-9859
Email: tyger@wilkinsradio.com
Website: www.wilkinsradio.com


-------- Original message --------
From: Kevin Kidd <kkbroadcastengineering@gmail.com>
Date: 12/4/17 1:46 PM (GMT-06:00)
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] SDRs in broadcast

I am looking for a way to monitor a list of stations with an SDR for signal strength and modulation and either log or email on failures.  Like the Burk Watch Band units did.

Plugins for SDR# will ALMOST do it but not really.  It looks like GQRX under linux will probably do it but I haven't gotten much beyond playing with my RaspberryPi's in linux.  I know that my conversion to linux is coming but I'm not really interested in learning a new vocation yet.



Kevin C. Kidd, CSRE/AMD
Lawrenceburg, TN
AM Ground Systems Company  -  WD4RAT
kkidd@kkbc.com  --  866-22-RADIO -- 866-227-2346
www.amgroundsystems.com

On Mon, Dec 4, 2017 at 1:27 PM, Bruce <bruce@psalmfm.org> wrote:
SDR# gives you a look at the mpx spectrum - pilot, rds and sca's etc

Follow-Ups: Re: SDRs in broadcast
(Kevin Kidd <kkbroadcastengineering@gmail.com>, 4 Dec 2017 20:52:24 -0000)
References: Re: SDRs in broadcast
(Nathaniel Steele <nathaniel.steele@icloud.com>, 1 Dec 2017 21:34:00 -0000)
RE: SDRs in broadcast
("Wiely Boswell" <wiely@faithradio.org>, 1 Dec 2017 21:39:46 -0000)
Re: SDRs in broadcast
(bruce@psalmfm.org, 1 Dec 2017 22:18:35 -0000)
RE: SDRs in broadcast
("Bill Hurne" <billhurne@pilgrimradio.com>, 4 Dec 2017 19:13:25 -0000)
Re: SDRs in broadcast
("Bruce" <bruce@psalmfm.org>, 4 Dec 2017 19:27:53 -0000)
Re: SDRs in broadcast
(Kevin Kidd <kkbroadcastengineering@gmail.com>, 4 Dec 2017 19:46:33 -0000)
Prev by date: Re: amb-xfer and windoz defender
(Tom Van Gorkom, 4 Dec 2017 19:55:20 -0000)
Next by date: Re: SDRs in broadcast
(Kevin Kidd, 4 Dec 2017 20:52:24 -0000)
Prev by thread: Re: SDRs in broadcast
(Kevin Kidd, 4 Dec 2017 19:46:33 -0000)
Next by thread: Re: SDRs in broadcast
(Kevin Kidd, 4 Dec 2017 20:52:24 -0000)
CRTech.org