I met with Jim Armstrong yesterday Willie, maybe this was directed at me.
He basically said the IQ was one big PCB, but no I didn’t get a really detailed answer as to wether the fader and on off buttons are on the pcb.
Here is a picture of the IQ and Fusion from yesterday. On the IQ you can see screws in the fader groove, but they could still be pcb mounted.
From: Willie Barnett [mailto:firstname.lastname@example.org]
Sent: Wednesday, November 08, 2017 10:39 AM
To: CRTech <email@example.com>
Subject: Re: [CRTech] Research: Axia iQ system
No reps, yet. This is "pure research". :)
A procedure sheet WOULD be VERY helpful! :)
On Wed, Nov 8, 2017 at 11:22 AM, Alex McKenzie <firstname.lastname@example.org> wrote:
Can your sales rep not answer this question in detail? I'll CC John Bissett with Telos to see if he could get you that answer in case you don't have a rep at this point.
Is there a procedure sheet for replacing a pot on/off switch on the IQ series? This has been an ongoing discussion on the CRTech forum for a few days and nobody has a good answer other than it's unlikely you'll ever need to! I can forward any replies on to the forum!