Here's the beauty of the iQ system –
IF your Mic pot switch DIES, you just go into the web config of the surface, assign that source to
a different fader, and keep on truckin with the alternate fader, until such a time that a maintenance window can be figured out!
Brian Gullikson, CBRE 98.5 KTIS-FM | Faith 900 KTIS
Life 97.3 KDNW | Faith 90.5 KDNI
Chief Engineer 3003
Snelling Ave. North
KTIS, KDNW, KDNI St. Paul, MN 55113
From: Willie Barnett [mailto:email@example.com]
Sent: Monday, November 06, 2017 9:23 AM
To: CRTech <firstname.lastname@example.org>
Subject: Re: [CRTech] Research: Axia iQ system
That's kinda what I expected. :) This is good news. Thanks! :)
On Mon, Nov 6, 2017 at 10:10 AM, Tom Van Gorkom <email@example.com> wrote:
I fairly sure from what I've seen that they have one small circuit board (maybe 3x6inch) and a few wires running to the switches and faders. They are very much like a computer keyboard.That's
why they are called a "control surface". They have one power supply connection and one network cable.