[CRTech] Christian Radio Tech [MSG 81221]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Research: Axia iQ system
To: CRTech <crtech@crtech.org>
Subject: RE: Research: Axia iQ system
From: "Gullikson, Brian F" <bfgullikson@unwsp.edu>
Date: Mon, 6 Nov 2017 15:27:29 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <CAOkhgWoijhvB1iM9=21P75DSM8qWVucB8UAY_w-MiLHmJASnSg@mail.gmail.com>
References: <CAOkhgWpjCpudXGTpgj4jKFRukwn+PvJoy+poO-CkD7inmM-8BQ@mail.gmail.com> <CANVGmBFJxpzQkj9Ru2H99T9_NCCSRmUG1KLRi=2BiZ-G_CXfGA@mail.gmail.com> <CAOkhgWoAZk+0vC+o9UmN7VneeW2WBx1XUHScubjXqavGWCwTzg@mail.gmail.com> <CAB42DVqcJuoo-GeYLrVXO446V+CjnHAhD-419oToDf7ZXs6WoA@mail.gmail.com> <CAOkhgWoijhvB1iM9=21P75DSM8qWVucB8UAY_w-MiLHmJASnSg@mail.gmail.com>
Thread-index: AQHTVLeABBpGwv/3JE+agFiyKsiKdKMDtSiAgAQmyQCAAAHmAIAAA4mA//+cZyA=
Thread-topic: [CRTech] Research: Axia iQ system

Here's the beauty of the iQ system –

 

IF your Mic pot switch DIES, you just go into the web config of the surface, assign that source to a different fader, and keep on truckin with the alternate fader, until such a time that a maintenance window can be figured out!

 

Brian

 

Brian Gullikson, CBRE               98.5 KTIS-FM | Faith 900 KTIS

                                            Life 97.3 KDNW | Faith 90.5 KDNI

Chief Engineer                                     3003 Snelling Ave. North

KTIS, KDNW, KDNI                                       St. Paul, MN  55113

bfgullikson@unwsp.edu                        Phone:  (651) 631-5094

 

From: Willie Barnett [mailto:wbradiolists@gmail.com]
Sent: Monday, November 06, 2017 9:23 AM
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] Research: Axia iQ system

 

That's kinda what I expected. :) This is good news. Thanks! :)

Willie...

 

On Mon, Nov 6, 2017 at 10:10 AM, Tom Van Gorkom <tomvangorkom@gmail.com> wrote:

I fairly sure from what I've seen that they have one small circuit board (maybe 3x6inch) and a few wires running to the switches and faders. They are very much like a computer keyboard.That's why they are called a "control surface". They have one power supply connection and one network cable.

 

Follow-Ups: Re: Research: Axia iQ system
(Willie Barnett <wbradiolists@gmail.com>, 6 Nov 2017 15:54:34 -0000)
References: Research: Axia iQ system
(Willie Barnett <wbradiolists@gmail.com>, 3 Nov 2017 15:12:45 -0000)
Re: Research: Axia iQ system
(Ron Huckeby <huckebyrj@gmail.com>, 4 Nov 2017 00:39:43 -0000)
Re: Research: Axia iQ system
(Willie Barnett <wbradiolists@gmail.com>, 6 Nov 2017 15:03:38 -0000)
Re: Research: Axia iQ system
(Tom Van Gorkom <tomvangorkom@gmail.com>, 6 Nov 2017 15:10:22 -0000)
Re: Research: Axia iQ system
(Willie Barnett <wbradiolists@gmail.com>, 6 Nov 2017 15:23:10 -0000)
Prev by date: Re: Research: Axia iQ system
(Willie Barnett, 6 Nov 2017 15:23:10 -0000)
Next by date: Re: Research: Axia iQ system
(Jim McDermott, 6 Nov 2017 15:32:23 -0000)
Prev by thread: Re: Research: Axia iQ system
(Willie Barnett, 6 Nov 2017 15:23:10 -0000)
Next by thread: Re: Research: Axia iQ system
(Willie Barnett, 6 Nov 2017 15:54:34 -0000)
CRTech.org