I think you might be
talking about the Model 730 RDS Encoder.
If I remember right,
the Mosley has a female DB9 at the transmitter site. The Model 730
also has a female DB9 on the back of it. In order for the two to work
together, you need to make / use a crossover cable with male ends on
them. The pin out is 2 – 3, 3 – 2, and 5 – 5. Also for the
Mosley, you need to put a jumper across pins 7,8 on the Mosley
There is a diagram on
Page 65 of the manual that describes how to make the cable.
If you try this and
are still having issues, please let us know.
Anyone successfully using a mosely sl9003 with an
innovonics 703 RDS encoder? Ican pass seriel data from one computer to
another just fine but when I hook my nexgen up to the rds through the
starlink it send scrambled text….
I found a note on the mosely
website pertaining to AZTEC RDS units suggesting 4800 baud. I’m setup for
9600 and it works with two computers but not with the RDS. I’m thinking
it’s a setting on the nexgen machine but I cant fid anything different in
the seriel port settings.
Thought I’d ask before I go through the significant
hassle of lowering the baud rate on all of the equipment in