[CRTech] Christian Radio Tech [MSG 81121]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Mosely SL9003 with Inovonics 703 RDS
To: CRTech <crtech@crtech.org>
Subject: RE: Mosely SL9003 with Inovonics 703 RDS
From: Ben Barber <ben@inovonicsbroadcast.com>
Date: Tue, 24 Oct 2017 05:29:05 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=ben@inovonicsbroadcast.com;
Content-language: en-US
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=inovonicsbroadcast.onmicrosoft.com; s=selector1-inovonicsbroadcast-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version; bh=eQEanEfKX+UM0HU4YFbHb3etEnIPgWwRBTVUlKBjcm8=; b=MtNw2wlrd74+pUVTWWQC3GBnTp3q6iBQO9vpybHSJl8AJ9VgS2U+doTadJXUQmqYtpvBQnPDgfR3lidGb4YbeSNJvpFUV+1wvn4gkXPq2PKWIhqkKmTjPoFwhk9T65yR38sLOJ8KwGianjwlf0BsTz334tVij1FJpvKsSJ49GNQ=
In-reply-to: <005f01d34c48$0e390310$2aab0930$@icloud.com>
References: <005f01d34c48$0e390310$2aab0930$@icloud.com>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AdNMR1zeAPH9yU4QQfyUwF5k01Xz+QAQJ/zA
Thread-topic: [CRTech] Mosely SL9003 with Inovonics 703 RDS

Hi Nathaniel,

 

I think you might be talking about the Model 730 RDS Encoder. 

If I remember right, the Mosley has a female DB9 at the transmitter site.  The Model 730 also has a female DB9 on the back of it.  In order for the two to work together, you need to make / use a crossover cable with male ends on them.  The pin out is 2 – 3, 3 – 2, and 5 – 5.  Also for the Mosley, you need to put a jumper across pins 7,8 on the Mosley side.

 

There is a diagram on Page 65 of the manual that describes how to make the cable. 

If you try this and are still having issues, please let us know.

 

 

Portrait & Logo

BEN BARBER
President / CEO


Inovonics Inc.
5805​ Highway 9
Felton,​ CA​ 95018 | USA
+1.831.458.0552
inovonicsbroadcast.com

 

From: nathaniel.steele@icloud.com [mailto:nathaniel.steele@icloud.com]
Sent: Monday, October 23, 2017 2:44 PM
To: crtech@crtech.org
Subject: [CRTech] Mosely SL9003 with Inovonics 703 RDS

 

Anyone successfully using a mosely sl9003 with an innovonics 703 RDS encoder? Ican pass seriel data from one computer to another just fine but when I hook my nexgen up to the rds through the starlink it send scrambled text….

 

I found a note on the mosely website pertaining to AZTEC RDS units suggesting 4800 baud. I’m setup for 9600 and it works with two computers but not with the RDS. I’m thinking it’s a setting on the nexgen machine but I cant fid anything different in the seriel port settings.

 

Thought I’d ask before I go through the significant hassle of lowering the baud rate on all of the equipment in question…

 

Thaks!

Follow-Ups: RE: Mosely SL9003 with Inovonics 703 RDS
(Nathaniel Steele <nathaniel.steele@icloud.com>, 24 Oct 2017 05:45:41 -0000)
References: Mosely SL9003 with Inovonics 703 RDS
(nathaniel.steele@icloud.com, 23 Oct 2017 21:44:16 -0000)
Prev by date: RE: Mosely SL9003 with Inovonics 703 RDS
(Bill Hurne, 23 Oct 2017 23:36:09 -0000)
Next by date: RE: Mosely SL9003 with Inovonics 703 RDS
(Nathaniel Steele, 24 Oct 2017 05:45:41 -0000)
Prev by thread: RE: Mosely SL9003 with Inovonics 703 RDS
(Bill Hurne, 23 Oct 2017 23:36:09 -0000)
Next by thread: RE: Mosely SL9003 with Inovonics 703 RDS
(Nathaniel Steele, 24 Oct 2017 05:45:41 -0000)
CRTech.org