[CRTech] Christian Radio Tech [MSG 80596]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: Wago Connectors Help Needed
To: CRTech <crtech@crtech.org>
Subject: Re: Wago Connectors Help Needed
From: "Allard, Mark G" <MGAllard@unwsp.edu>
Date: Thu, 17 Aug 2017 14:16:40 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <CAP8KTHZTcarvm=Dc4_7yjXDmqUABfJ5LcPGgD2u6ZU2JQrDi+Q@mail.gmail.com>
References: <CAP8KTHZTcarvm=Dc4_7yjXDmqUABfJ5LcPGgD2u6ZU2JQrDi+Q@mail.gmail.com>
Thread-index: AQHTF1sWOpJZQhCCC0CfZW+RfOYO1aKImC70
Thread-topic: [CRTech] Wago Connectors Help Needed
I'm not sure if I've worked with Wago but have worked with something similar.  They snap onto a DIN rail and can be grouped together with snap-in bus bars.  No wire stripping needed as I recall.
Does that help?
Mark A

Sent from my iPad

On Aug 17, 2017, at 08:16, Steve Tuzeneu <stuzeneu@gmail.com> wrote:

Hey Guys:

Anyone have lots of experience with Wago connectors (see photo below) and you have a little time to give tips on how to deal with them?  Maybe I could call you?

Photo below.  Don't know if it will go through or not.

<wago.jpg>
​​

--
Steve Tuzeneu,  CBT 
Network Staff Engineer
BBN Radio Network
P.O. Box 7300
Charlotte , NC 28241-7300 
704-523-5555 Extension 138
Member: Society of Broadcast Engineers
G.R.O.L./N1XXE-Extra Class Operator

JPEG image

Follow-Ups: RE: Wago Connectors Help Needed
("Allard, Mark G" <MGAllard@unwsp.edu>, 17 Aug 2017 15:34:34 -0000)
References: Wago Connectors Help Needed
(Steve Tuzeneu <stuzeneu@gmail.com>, 17 Aug 2017 13:16:41 -0000)
Prev by date: Re: repair of switching...
(JOHN VAN MILLIGAN, 17 Aug 2017 13:46:54 -0000)
Next by date: Re: repair of switching...
(Gary Liebisch, 17 Aug 2017 14:31:39 -0000)
Prev by thread: Wago Connectors Help Needed
(Steve Tuzeneu, 17 Aug 2017 13:16:41 -0000)
Next by thread: RE: Wago Connectors Help Needed
(Allard, Mark G, 17 Aug 2017 15:34:34 -0000)
CRTech.org