[CRTech] Christian Radio Tech [MSG 80520]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Moving Heavy Objects
To: CRTech <crtech@crtech.org>
Subject: RE: Moving Heavy Objects
From: Scott Horner <Scott.Horner@SalemMedia.com>
Date: Thu, 10 Aug 2017 20:02:41 +0000
Accept-language: en-US
Authentication-results: spf=none (sender IP is ) smtp.mailfrom=Scott.Horner@SalemMedia.com;
Content-language: en-US
In-reply-to: <36946D292176674E957C13106F0CC784C4ED2BA2@EMP-MB-02.emp.ark.nwc.edu>
References: <CALuALeWCmK-CQyP6HcQioOBuetkWGqrMy92XnZY-xLEdTbX2LQ@mail.gmail.com> <E077351015F74F4EAAFFC02321F37A42A17E8205@EMP-MB-02.emp.ark.nwc.edu> <CAA8ua=wSw1NxNAtH2rgQHwQneKj6aUVd75CU3p7Gr8Ud4q7DqQ@mail.gmail.com> <E077351015F74F4EAAFFC02321F37A42A17E827E@EMP-MB-02.emp.ark.nwc.edu> <CAA8ua=ygo+ePtoJQsPOUJxnJ5D=n4J7ityhGzmYC9nxyDH3Oew@mail.gmail.com> <36946D292176674E957C13106F0CC784C4ED2BA2@EMP-MB-02.emp.ark.nwc.edu>
Spamdiagnosticmetadata: NSPM
Spamdiagnosticoutput: 1:99
Thread-index: AQHTEgl6DPY8i/dcMEuzTf0WsA1qBaJ+ANgAgAABMIA=
Thread-topic: [CRTech] Moving Heavy Objects

I have a 3000 pound RCA 1K transmitter in my museum and use what is called a Vestil Lever Dollie and steel pipes to move it around. Available on Amazon and Global Industrial.

 

Thanks,

 

Scott Horner

Salem Media Group

 

From: Allard, Mark G [mailto:MGAllard@unwsp.edu]
Sent: Thursday, August 10, 2017 12:54 PM
To: CRTech <crtech@crtech.org>
Subject: RE: [CRTech] Moving Heavy Objects

 

I wonder if you could rent something like that.

Mark A

 

From: Pat Wahl [mailto:pwahl@wwib.com]
Sent: Thursday, August 10, 2017 13:50
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] Moving Heavy Objects

 

Here's an example with a guy moving a safe. You can see how you can lifts the object just slightly from the floor for clearance through a low doorway. Also, it doesn't stick out to the side if that's tight.

 

 

On Thu, Aug 10, 2017 at 12:24 PM, Gullikson, Brian F <bfgullikson@unwsp.edu> wrote:

Could you post a link to a picture of what you mean by "piano dolly"?  I'm having a problem trying to visualize such a device.  All I'm coming up with is the three-wheeled thing that would be installed under the three legs of a baby grand piano.

 

Brian

 

Brian Gullikson, CBRE               98.5 KTIS-FM | Faith 900 KTIS

                                            Life 97.3 KDNW | Faith 90.5 KDNI

Chief Engineer                                     3003 Snelling Ave. North

KTIS, KDNW, KDNI                                       St. Paul, MN  55113

bfgullikson@unwsp.edu                        Phone:  (651) 631-5094

 

From: Pat Wahl [mailto:pwahl@wwib.com]
Sent: Thursday, August 10, 2017 12:20 PM
To: CRTech <crtech@crtech.org>
Subject: Re: [CRTech] Moving Heavy Objects

 

The piano dolly is better than you think. It will allow you to lift a really heavy object and pass it through a doorway when there is only a small fraction of an inch clearance top or sides. We moved a Harris FM20 with it a while back with almost zero door clearance. I was amazed at how easily it went.

 

Pat Wahl

Chippewa Falls, WI

 

On Thu, Aug 10, 2017 at 12:14 PM, Gullikson, Brian F <bfgullikson@unwsp.edu> wrote:

Aaron,


To roll a transmitter, we've used the black Natural Gas pipes that you can buy at Menards.  I believe they're 3-4 feet long usually.  They're very rigid and shouldn't crush under the weight of that Continental.

 

Brian

 

Brian Gullikson, CBRE               98.5 KTIS-FM | Faith 900 KTIS

                                            Life 97.3 KDNW | Faith 90.5 KDNI

Chief Engineer                                     3003 Snelling Ave. North

KTIS, KDNW, KDNI                                       St. Paul, MN  55113

bfgullikson@unwsp.edu                        Phone:  (651) 631-5094

 

From: Aaron Pearson [mailto:apearson.engineer@gmail.com]
Sent: Thursday, August 10, 2017 11:51 AM
To: crtech <crtech@crtech.org>
Subject: [CRTech] Moving Heavy Objects

 

So I'm about to remove a Continental 816R-2C. Rumor has it these transmitters can be pretty heavy. I know it can be removed because it was at one point installed, but I'm trying to "work smarter not throw my back out" as a wise man once said. The previous engineer informs me they muscled it through the doorway with crowbars and it was a pretty tight fit. 

 

Any wisdom on making my life easier that doesn't involve cutting a bigger hole in the wall? 

 

What's worked for you in the past? Ramps and rollers, simple-machines style? Pallet jacks? Magnetic levitation?

 

- Engineer Aaron from the Northwoods

 

 

References: Moving Heavy Objects
(Aaron Pearson <apearson.engineer@gmail.com>, 10 Aug 2017 16:51:42 -0000)
RE: Moving Heavy Objects
("Gullikson, Brian F" <bfgullikson@unwsp.edu>, 10 Aug 2017 17:14:38 -0000)
Re: Moving Heavy Objects
(Pat Wahl <pwahl@wwib.com>, 10 Aug 2017 17:19:59 -0000)
RE: Moving Heavy Objects
("Gullikson, Brian F" <bfgullikson@unwsp.edu>, 10 Aug 2017 17:25:07 -0000)
Re: Moving Heavy Objects
(Pat Wahl <pwahl@wwib.com>, 10 Aug 2017 18:50:17 -0000)
RE: Moving Heavy Objects
("Allard, Mark G" <MGAllard@unwsp.edu>, 10 Aug 2017 19:54:43 -0000)
Prev by date: Re: Moving Heavy Objects
(Pat Wahl, 10 Aug 2017 20:00:40 -0000)
Next by date: Re: Moving Heavy Objects
(Steve Tuzeneu, 10 Aug 2017 20:06:49 -0000)
Prev by thread: Re: Moving Heavy Objects
(Pat Wahl, 10 Aug 2017 20:00:40 -0000)
Next by thread: Re: Moving Heavy Objects
(JIm Turvaville, 10 Aug 2017 22:10:13 -0000)
CRTech.org