[CRTech] Christian Radio Tech [MSG 80209]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Tascam 202 MKIII Question
To: CRTech <crtech@crtech.org>
Subject: RE: Tascam 202 MKIII Question
From: "Allard, Mark G" <MGAllard@unwsp.edu>
Date: Wed, 12 Jul 2017 23:23:23 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <002201d2fb5e$2de70c60$89b52520$@amb-os.com>
References: <002201d2fb5e$2de70c60$89b52520$@amb-os.com>
Thread-index: AdL7W7K4DLHpzOPwR6O0dKFQhZoAvgACd3Hg
Thread-topic: [CRTech] Tascam 202 MKIII Question

Most likely, rubber wheels and such have become solid.

Taking the cover off and watching it work might verify that.

Mark A


From: Charley Mefferd [mailto:charley@amb-os.com]
Sent: Wednesday, July 12, 2017 17:28
To: 'CRTech' <crtech@crtech.org>
Subject: [CRTech] Tascam 202 MKIII Question


Hi, CRTech:  I powered up a Tascam 202 MKIII dual cassette deck that I haven’t used in years.  Both decks will play forward (a-side) and backwards (b-side) perfectly and the REC function seems to work normally.  Unfortunately, neither deck will FFWD or REV.  When I press the << or >> buttons, I hear a click…and then nothing.  I find it odd that BOTH decks are acting the exact same way so I am wondering if there is some setting that is preventing FFWD and REV.  I have tapped the INTRO CHECK and SYNC REV buttons but nothing seems to happen.  When I tap BLANK SCAN, the words “BLANK SCAN” lights up on the on the display.


That’s all the troubleshooting I’ve done so far.  Any thoughts?


Charley Mefferd

VP, Sales and Marketing

Amb-OS Media

949-681-7640 – Office

972-400-2674 – Cell



References: Tascam 202 MKIII Question
("Charley Mefferd" <charley@amb-os.com>, 12 Jul 2017 22:52:37 -0000)
Prev by date: Tascam 202 MKIII Question
(Charley Mefferd, 12 Jul 2017 22:52:37 -0000)
Next by date: Re: I praise Nautel too.....but...
(Mark Croom, 12 Jul 2017 23:31:28 -0000)
Prev by thread: Tascam 202 MKIII Question
(Charley Mefferd, 12 Jul 2017 22:52:37 -0000)
Next by thread: RE: Tascam 202 MKIII Question
(Bill Hurne, 12 Jul 2017 23:32:26 -0000)