[CRTech] Christian Radio Tech [MSG 79775]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Back equipment
To: CRTech <crtech@crtech.org>
Subject: RE: Back equipment
From: "Gullikson, Brian F" <bfgullikson@unwsp.edu>
Date: Tue, 9 May 2017 23:44:37 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <DM5PR12MB1658ACE0B11619B029D25644EDEF0@DM5PR12MB1658.namprd12.prod.outlook.com>
References: <CAB42DVq=f0XEv9eiBoZ8kNK8uTuf10HtzHyW+=0LGiKYJsXVCw@mail.gmail.com> <DM5PR12MB1658ACE0B11619B029D25644EDEF0@DM5PR12MB1658.namprd12.prod.outlook.com>
Thread-index: AQHSyQNTit+KbCEQ0UG+4V+cJszyLqHs08mAgAAoWAD//64cQA==
Thread-topic: [CRTech] Back equipment



My AARON 650's give the RSSI on the screen… Not sure why yours wouldn't… :)




Brian Gullikson, CBRE               98.5 KTIS-FM | Faith 900 KTIS

                                            Life 97.3 KDNW | Faith 90.5 KDNI

Chief Engineer                                     3003 Snelling Ave. North

KTIS, KDNW, KDNI                                       St. Paul, MN  55113

bfgullikson@unwsp.edu                        Phone:  (651) 631-5094


From: Scott Todd [mailto:stodd@kloveair1.com]
Sent: Tuesday, May 09, 2017 6:37 PM
To: 'CRTech' <crtech@crtech.org>
Subject: RE: [CRTech] Back equipment


The only thing I don’t like about it vs. BW’s RBRX-1 is it doesn’t give you the signal strength on the screen.  It’s handy for peaking the receive signal.


Scott Todd


From: Tom Van Gorkom [mailto:tomvangorkom@gmail.com]
Sent: Tuesday, May 09, 2017 4:13 PM
To: CRTech
Subject: Re: [CRTech] Back equipment


I highly recommend these - the best out there for pulling in a signal in bad conditions.

References: Re: Back equipment
(Tom Van Gorkom <tomvangorkom@gmail.com>, 9 May 2017 21:12:51 -0000)
RE: Back equipment
(Scott Todd <stodd@kloveair1.com>, 9 May 2017 23:37:12 -0000)
Prev by date: RE: Back equipment
(Scott Todd, 9 May 2017 23:37:12 -0000)
Next by date: RE: Back equipment
(Cameron Beierle, 10 May 2017 00:09:35 -0000)
Prev by thread: RE: Back equipment
(Scott Todd, 9 May 2017 23:37:12 -0000)
Next by thread: Re: Back equipment
(Andy Larsen, 11 May 2017 13:34:27 -0000)