[CRTech] Christian Radio Tech [MSG 79470]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
Re: Re: Phasing Issues? **UPDATE**
To: CRTech <crtech@crtech.org>
Subject: Re: Re: Phasing Issues? **UPDATE**
From: "Allard, Mark G" <MGAllard@unwsp.edu>
Date: Mon, 10 Apr 2017 04:51:04 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <CY4PR2201MB109655EC408B28A896DA22978C010@CY4PR2201MB1096.namprd22.prod.outlook.com>
References: <7.0.1.0.2.20170408133618.07205be0@oldradio.com>,<CY4PR2201MB109655EC408B28A896DA22978C010@CY4PR2201MB1096.namprd22.prod.outlook.com>
Thread-index: AQHSsbYPBaeFYb2pKEq0T8dBU3Cyhg==
Thread-topic: [CRTech] Re: [BC] Phasing Issues? **UPDATE**
I'm coming to this conversion late.  Are you trying to come from a stereo source into the 9100B which is mono in?
Mark A

Sent from my iPad

> On Apr 9, 2017, at 20:38, Robert Chrysafis <kc8gpd@hotmail.com> wrote:
> 
> Here is how i originally had everything hooked up.
> 
> i just have the red (+) from right channel put to (+) on the processor 
> input and the black (-) to the (-) on the processor input which in this 
> case is an optimod 9100b.
> 
> on the output to tx input which is 600 ohm unbalanced i have the shield 
> (output) to shield (input) and the positive rail (output) to hot on input.
> 
> i had a passive balun kicking around which i have put on the output so 
> balanced is going into balun and coming out unbalanced. this is now 
> hooked up between tx and optimod
> 
> i have on order 475 ohm 1% and 20k ohm 1% resistors which should be here 
> monday which i will use to properly sum the input to the optimod.
> 
> i am hoping based on some of the comments i have seen that this will 
> solve the missing vocals and/or instrumentation issues.
> 
> ---------------------------------------------------------------------
> For CRTech resources visit http://CRTech.org/
> To unsubscribe, e-mail: crtech-unsubscribe@crtech.org
> List problems?  E-mail: TechStaff@CRTech.org
> 
Follow-Ups: Re: Re: Phasing Issues? **UPDATE**
(Robert Chrysafis <kc8gpd@hotmail.com>, 10 Apr 2017 14:17:11 -0000)
References: Re: Phasing Issues? **UPDATE**
(Robert Chrysafis <kc8gpd@hotmail.com>, 10 Apr 2017 01:38:14 -0000)
Prev by date: Re: Re: Phasing Issues? **UPDATE**
(RADIO DOCTOR, 10 Apr 2017 01:57:21 -0000)
Next by date: Re: Re: Phasing Issues? **UPDATE**
(Robert Chrysafis, 10 Apr 2017 14:17:11 -0000)
Prev by thread: Re: Re: Phasing Issues? **UPDATE**
(RADIO DOCTOR, 10 Apr 2017 01:57:21 -0000)
Next by thread: Re: Re: Phasing Issues? **UPDATE**
(Robert Chrysafis, 10 Apr 2017 14:17:11 -0000)
CRTech.org