[CRTech] Christian Radio Tech [MSG 79390]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Prefab studios
To: CRTech <crtech@crtech.org>
Subject: RE: Prefab studios
From: Jim Sanders <JSanders@AmbassadorAdvertising.com>
Date: Wed, 5 Apr 2017 17:02:05 +0000
Accept-language: en-US
Content-language: en-US
In-reply-to: <4A203F43389E4472BBEB0CC259B891D1@PAUL>
References: <b0055f2194a64e8a8d40636996868e29@KAMBSERVER.KAMB.local> <4A203F43389E4472BBEB0CC259B891D1@PAUL>
Thread-index: AQHSriyssAt3/0snHkyYJrDai7GY06G2/4xA
Thread-topic: [CRTech] Prefab studios

One addition item with regard to the many booths I’ve tried through the years . . .

 

No matter what manufacturer you chose, be sure you have adequate (even oversized) airflow and good lighting.  Too many times the lighting has been poor or we had to “fan” the door for fresh air. 

 

Most booths sufficiently knock down exterior noise.  But you want sufficient HVAC so it doesn’t get uncomfortable.

 

From: Paul Lierman [mailto:paullierman@bellsouth.net]
Sent: Wednesday, April 05, 2017 9:50 AM
To: CRTech
Subject: Re: [CRTech] Prefab studios

 

We installed two Vocalbooth units at Moody Radio South (Tuscaloosa cluster) in 2009.  Worked out well.

 

 

Paul Lierman
Technical Consultant
paullierman@bellsouth.net
904.325.5304

----- Original Message -----

From: Mark Murdock

To: CRTech

Sent: Wednesday, April 05, 2017 11:59 AM

Subject: [CRTech] Prefab studios

 

Does anyone here use any of the prefab studios like WhisperRoom or Vocalbooth? Or do you have any experience with them? Are they really suited to radio use?

 

Thanks,

 

Mark Murdock

Production Director

KAMB

90 E. 16th St.

Merced, CA 95340

(209) 723-1015

www.celebrationradio.com

mark@celebrationradio.com

 

 


AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



References: Prefab studios
(Mark Murdock <mark@celebrationradio.com>, 5 Apr 2017 16:00:06 -0000)
Re: Prefab studios
("Paul Lierman" <paullierman@bellsouth.net>, 5 Apr 2017 16:50:00 -0000)
Prev by date: Re: Prefab studios
(Paul Lierman, 5 Apr 2017 16:50:00 -0000)
Next by date: RE: Prefab studios
(David Woodworth, 5 Apr 2017 17:09:38 -0000)
Prev by thread: Re: Prefab studios
(Paul Lierman, 5 Apr 2017 16:50:00 -0000)
Next by thread: RE: Prefab studios
(David Woodworth, 5 Apr 2017 17:09:38 -0000)
CRTech.org