[CRTech] Christian Radio Tech [MSG 79315]
[Thread Prev] [-- Thread Index --] [Thread Next] [Date Prev] [-- Date Index --] [Date Next]
RE: Barix as backup STL
To: "'CRTech'" <crtech@crtech.org>
Subject: RE: Barix as backup STL
From: "Bill Hurne" <billhurne@pilgrimradio.com>
Date: Wed, 29 Mar 2017 08:46:04 -0700
Content-language: en-us
In-reply-to: <CACci8U7iypBnPKf1=db_fQfk5xC65P6DWNZqxMjsJFKSsAOJ3A@mail.gmail.com>
References: <CAJHfeBv1=2YLbH5dnSbj+_=0Xogu4D3pxvuCK5wnqLB8fYR7tQ@mail.gmail.com> <CACci8U7iypBnPKf1=db_fQfk5xC65P6DWNZqxMjsJFKSsAOJ3A@mail.gmail.com>
Thread-index: AQF4UMAjyyRzbGcyMphGqvVRPzueKAIXMfzdok/quKA=

The Barix work, but we found the extra expense of the Comrex BRIC-Link gives better performance than the low cost Barix.   The BRIC-Links have better buffering and pass audio more cleanly during times of poor internet connection or congestion.   The Barix audio has more tendency to break up during poor connections.





From: Dave Land [mailto:dave@klvv.com]
Sent: Wednesday, March 29, 2017 6:52 AM
To: CRTech
Subject: Re: [CRTech] Barix as backup STL


Also take a look at Comrex BRIC-Link. We have found them to be very good. NO problems for years (so far).


Chief Engineer

The Love Station, inc


On Tue, Mar 28, 2017 at 11:20 AM, BIll Moede <bmoedereplay@gmail.com> wrote:

I'm looking to put together a backup STL system for use over an IP / Internet connection.  For those of you with experience with Barix, are these the two pieces I would need;   Barix Instreamer and a Barix Exstremer 100.




Follow-Ups: Re: Barix as backup STL
(Chris Wygal <cmwygal@gmail.com>, 30 Mar 2017 14:00:13 -0000)
References: Barix as backup STL
(BIll Moede <bmoedereplay@gmail.com>, 28 Mar 2017 16:21:00 -0000)
Re: Barix as backup STL
(Dave Land <dave@klvv.com>, 29 Mar 2017 13:51:49 -0000)
Prev by date: Re: Caution: targeted infected email supposedly from "CRTech"
(Rick Jesse, 29 Mar 2017 14:46:45 -0000)
Next by date: RE: Extra
(gcartercrt, 29 Mar 2017 19:23:40 -0000)
Prev by thread: Re: Barix as backup STL
(Dave Land, 29 Mar 2017 13:51:49 -0000)
Next by thread: Re: Barix as backup STL
(Chris Wygal, 30 Mar 2017 14:00:13 -0000)